Kenwood KAC-X501F - Manual (Page 10)

Connection
■ RCA cable connection
E Left input [H Left input
RCA cable ground terminal
Power control wire
(To Power control terminal)
CENTER UNIT
(Cassette receiver,
CD receiver, etc.)
Rear output
* : Commercially available parts
RCA cable ground terminal
When using an RCA cable with a ground lead attached, connect the ground lead to this
terminal.
ACAUnON
Do not use this terminal for power source grounding. This unit will be damaged if the power
source grounding cable is connected to this terminal.
■ Speaker Selection
• The rated input power of the speakers that are going to be connected should be greater than
the maximum output power (in Watts) of the amplifier. Use of speakers having input power
ratings that are less than the output power of the amplifier will cause smoke to be emitted as
welt as damage.
• The impedance of the speakers that are going to be connected should be 2Q or greater (for
stereo connections), or 4£2 or greater (for bridged connections). When more than one set of
speakers are going to be used, calculate the combined impedance of the speakers and then
connect suitable speakers to the amplifier.
Examples:
Stereo Connections (4ilJ Bridged Connections (4H)
200 W or greater 600 W or greater
200W
O
(AQ)
©
4ii
Maximum output of
the amplifier
Combined
impedance
Ail
Rated input power and
impedance of the speakers
Ail
10 Ena fish