Kenwood KDC-DAB43U User Manual

Determining the antenna instaiiation iocation, Antenna instaiiation

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Determining the antenna instaiiation iocation

. « where the earth sheet of the Amplifier ©can be stuck on the metal part of the front pillar.

Antenna instaiiation

1 Check the installation location.

Wipe the area where antenna film ©,

amplifier unit©, and earth sheet is to be

placed with the included cleaner ®.

■ The paint work on the metal surface need

not be removed

■ Ensure that the glass surface is completely

dry before mounting element

^ If the glass is cold to ensure good adhesion

warm the glass with the cars windscreen

heater

Remove the backing (tag I) of antenna

film © horizontally and stick the

antenna on the front glass.

After sticking, rub the element on the

windscreen in the direction of the arrow

shown in the figure to bond it & remove

bubbles.

■ Remove the backing gently

■ Do not touch the sticky side of the

antenna film

Remove the backing (tag II) of antenna

gently while applying pressure.

Remove the backing film (tag III).

■ Do not touch the feeder terminal of the

element. Also, do not apply any glass

cleaner.

Feeder terminal