How to set the delay time, Delay time setting – Kenwood DVR-6100 User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

DVR-605/DVR-6100/DVR-6100K (EN)
The ideal listening position for 6-channel surround playback is the point at equal distance from all speakers.
By setting the delay time for the center and surround speakers, this item realizes the ideal listening position virtually.
(The center and surround speakers can be set as if they are laid out on the dotted line circle shown below.)
Ideal center speaker position
How to set the delay time
Delay time setting sets the delay time converted to the
distance from the speaker to the listening position.
The front speakers (L/R) can be adjusted between 40 feet
(12 m) and 3 feet (0.9 m).
The range which can be set for the center speaker (C) and
the surround speakers (LS/RS) differs according to the
setting for the front speakers. A longer distance than for
the front speakers can not be set.
Delay time setting
Blinks
..........г i ■ i............................. (D3-
Return to the original display is made when no operation
is performed for about 5 seconds.
Feet ir dication
Meter indication
1
n-i —QD
'/ I
The process advances to center speaker adjustment
when the SETUP key is pressed.
''/W^
-'/IN''
Repeat
O
and
O
in the same way to adjust the
surround speakers.