Let's put out some sound, Preparation, Basic use method – Kenwood DVR-6100 User Manual
Page 18: Selecting the desired input, Q volume adjustment, Muting the sound temporarily, Listening through headphone, Volume adjustment, Rpbiell, C input
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
B
Let's put out some sound
Preparation
I MAIN UNITI
set the
POWER
switch to the ON (_«.) position.
rpBiell
INPUT—
Ipc^l
SELECTORh" ^
-POWER
Jvo-ouo/uvh-biuu/uvh-oiOOK i
VOLUME CONTROL
: '/
Basic use method
MAIN UNIT
Selecting the desired input
I REMOTE
(C INPUT^^
Switching is done as follows when the INPUT key of the
main unit is pressed. (The parenthesized part shows an
operating example.)
® Tuner (frequency display)
@ VCR (VCR ANALOG ^ VCR)
(3)
SAT/CABLE (SAT/CABLE ^ AUTO ^ SAT/CABLE)
® FRONT AUX (FRONT ^ OPTICAL ^ FRONT)
(D
DVD/CD
Q
Volume adjustment
I MAIN UNIT I
I REMOTE I
To increase
To decrease
To increase
To decrease
When one of the keys on the left is pressed while STANDBY
mode, the power will be switched on automatically and the input
will be selected.
The power will be switched on and the respective operation wil
be
performed
also
when
the
OPEN/CLOSE
key,
the
PLAY/
PAUSE
key or the
BAND
key on the main unit is pressed during
STANDBY mode.
When a disc is set in the disc tray and the
DVD CD
key is pressed,
disc playback will start automatically
In case of operation with the remote control unit, first select
the input or device to be operated with the INPUT SELEC
TOR keys then perform the desired operation.
The present mode of the remote control unit may not
coincide with the equipment to be operated.
• When using the remote to select SAT or CABLE;
SAT (SAT ^ AUTO ^ SAT)
CABLE (CABLE ^ AUTO ^ CABLE)
The input mode can be switched with SAT/CABLE
and FRONT AUX.
Refer to "Changing the INPUT MODE"
-iJ|.
Normally "MAX" is displayed when the volume settings set to
the maximum value
If you have adjusted the speaker level above Odb with the
TRIM
key (-dij), "MAX" will not be displayed.
Muting the sound temporarily
• Press the
MUTE
key.
• Press again to resume the original volume.
• The sound muting is also cancelled when the volume is con
trolled.
Listening through headphone
This unit offers various surround modes, but it switches
automatically to stereo mode when headphones are connected.
To open the door, pull the lower part on the right side of the
main unit
•
• The sounds from all speakers are cut off.