Specifying the display language (language), Configuring sleep state settings (sleep) – Casio EX-H20G User Manual
Page 147
147
Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Language
.
Specify the display language you want.
1
Select the tab on the right.
2
Select “Language”.
3
Select the language you want.
• Camera models sold in certain geographic areas
may not support display language selection.
• Place names (country, landmark), city names,
recommended photogenic spot names, and place name candidates (country, city,
landmark) when shooting may not match the language you select with this setting.
Place names and proper names in map data, recommended photogenic spot data,
and place name data are displayed in the languages used when the data way
originally compiled.
Procedure
[MENU] * Set Up Tab * Sleep
This feature turns off the monitor screen whenever no camera operation is performed
for a preset amount of time. Press any button to turn the monitor screen back on.
Trigger Time Settings: 30 sec, 1 min, 2 min, Off (Sleep is disabled while “Off” is
selected.)
• Sleep is disabled under any of the following conditions.
– In the PLAY mode
– In the MAP mode
– While the camera is connected to a computer or other device
– During a slideshow
– During “Ë Tracking”
– During movie recording and playback
• When both sleep and Auto Power Off are turned on, Auto Power Off takes priority.
Specifying the Display Language (Language)
Configuring Sleep State Settings (Sleep)
1
23