Kenwood KAC-1021 - Manual (Page 3)

Do not place the unit in areas of exces­
sive dust, high humidity or on unstable
surfaces.
CLEANING
1. Turn the po\A/er off, before cleaning the
unit.
2. Do not use any type of abrasive pad, thin­
ner, benzine and any such kind of
objects.
3. Wipe the front panel and other exterior
surfaces of the unit with a soft dry cloth
or a soft cloth lightly moistened with a
neutral detergent.
KAC-1021 is designed to be profession­
ally installed. The length and nature of
your warranty are dramatically affected
if you attempt to install it yourself. Skill
and experience are required to achieve
high-end sound, reliability, and appear­
ance in a high-powered autosound sys­
tem. If you want to install your own unit,
read this booklet completely, research
speaker systems and source units exten­
sively.
Under normal operation, the amplifier
may become too hot to touch. Please use
caution.
When removing the amplifier, dis­
connect the fusible link at the battery pri­
or to disconnecting the amplifier.
If an abnormal smell or smoke is detect­
ed, immediately turn the power off.
If you have difficulty in installing the set
in your car, please contact your
KENWOOD dealer.
(En)