Bose 901 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Equalizer to the RIGHT or B channel OUTPUT terinmal on the
tape recorder.
3.
Similarly, connect the UEFT channel TAPE IN terminal
on the Equalizer to the liEFT or A channel OUTPUT on the tape
recorder.
4.
Connect the RIGHT channel TAPE OUT terminal on the
Equalizer to the RIGHT or B channel INPUT terminal on the
recorder.
5.
Similarly, connect the LEFT channel TAPE OUT on the
Equalizer to the LEFT or A channel INPUT on the recorder.
These connections are illustrated in Figure 2. Installation of
the recorder is now complete. The TAPE switch on the Equalizer re
places the TAPE MONITOR switch on the preamplifier or receiver and
performs the identical function. Consult your amplifier manual for a
description of its use.
VI.
Alternative Method: Connecting the 901 ' Active Equalizer
Between a Preamplifier and a Power Amplifier.
If you have a separate preamplifier and power amplifier, then
the Equalizer may alternatively be inserted between these pieces of equip
ment. With this method of connection, the preamplifier is used and con
nected to other components of your system (except for your power ampli
fier) as if the Equalizer were not present. If this connection is desired,
use the following procedure and refer to Figure 3.
1
.
Turn all power off.
2.
If your system is already installed, then remove
the two audio cables connecting the INPUT terminals on
your power amplifier to the OUTPUT terminals on your
preamp (These preamp terminals may alternatively be
labeled PREAMP OUT or OUTPUT TO AMPLIFIER).
3,
Using one of the cables supplied with the Equalizer
or one of the cables you have just disconnected, connect
- 7 -