Bose 161 User Manual
Bose Acoustics
Table of contents
Document Outline
- Where to find …
- Before you begin
- For your records
- Unpacking
- Placing your Bose 161™ speakers
- Choosing speaker cord
- Preparing speaker cord
- Connecting speaker cord to the speakers
- Connecting speaker cord to your receiver or amplifier
- Testing speaker connections
- Mounting your speakers on a wall
- 1. Hold the mounting template in position and mark holes for the mounting hardware. If you plan to feed wires through the wall, mark the speaker wire pilot hole also.
- 2. Drill holes for the chosen mounting hardware.
- 3. Mount bracket part A to the wall and mount bracket part B to the rear of the speaker (Figure 3).
- 4. Secure the speaker with bracket part B to bracket part A using screw C. To adjust the angle, loosen screw C slightly, move the speaker up or down, and retighten screw C.
- Figure 3
- Cleaning your speakers
- Troubleshooting
- Technical information