Canon L360 - Manual (Page 12)

12
VIII RE-SENDING
IF No.VII ABOVE METHOD IS NOT POSSIBLE, EACH
DOCUMENT RECEIVED IN THE MEMORY CAN BE RE-SENT
INDIVIDUALLY TO ANOTHER DESTINATION FOR PRINTING
1.
Open One-Touch Speed Dial panel
2. Press
Memory Reference
3.
Press
∨∨∨∨
to display “3. RESEND DOCUMENT”
4. Press
Set
5. Press
∨∨∨∨
if necessary to select a new “TX/RX No.”
(must be greater than 5000)
6. Press Set to display “SELECT LOCATIONS”
7. Dial the fax number
8. Press Set twice
Machine will now start to send the document.