Cop y – Canon IXUS 230 HS User Manual

Page 176

Using an Eye-Fi Card

176

You can check the Eye-Fi card’s access point SSID, or connection status.

Choose [Connection info].

Press the

n button to choose [Eye-Fi

Settings] in the

3 tab, then press the m

button.

Press the

op buttons to choose

[Connection info], then press the

button.

The connection info screen will appear.

You can set the card to disable Eye-Fi transfer.

Choose [Disable] in [Eye-Fi trans.].

Press the

n button to choose [Eye-Fi

Settings] in the

3 tab, then press the m

button.

Press the

op buttons to choose [Eye-Fi

trans.], then press the

qr buttons to

choose [Disable].

Checking Connection Information

Disabling Eye-Fi Transfer

What if [Eye-Fi Settings] does not appear?

[Eye-Fi Settings] will not appear when an Eye-Fi card is not inserted in the
camera, and when an Eye-Fi card’s write-protect tab is in the locked position. For
this reason, settings cannot be changed for Eye-Fi cards equipped with a write-
protect tab when the tab is in the locked position.

COP