P. 18), Using the self-timer, Func. menu * (drive mode) – Canon A630 User Manual
Page 20
18
Using the Self-Timer
1.
FUNC. Menu
* (Drive Mode)
/
/
.
* Default setting.
• When the shutter button is pressed fully, the
self-timer lamp will blink. When using red-
eye reduction, the self-timer lamp will blink
and then stay lit for the last 2 seconds.
To cancel the self-timer, press the FUNC./SET button and use the
or
button to select
.
10 sec. delay: The shutter releases 10 sec. after the shutter button
is pressed.
• 2 sec. before the shutter releases, the self-timer sound beeps
quickly and the lamp will speed up*
1
.
2 sec. delay: The shutter releases 2 sec. after the shutter button is
pressed.
• The self-timer sound beeps quickly*
1
when the shutter button is
pressed and the shutter will release 2 sec. later.
Custom Timer: You can change the delay time (0-10*
2
, 15, 20, 30
sec.) and number of shots (1-10*
3
).
• When a delay time of over 2 seconds is set for the [Delay] option,
the self-timer sound beeps quickly 2 seconds*
1
before the shutter
releases. If multiple shots have been specified for the [Shots]
option, the sound will play for the first shot only.
*1 May differ depending on My Camera settings.
*2 Default setting.
*3 Default setting is 3 shots.