Compaq iPAQ H3800 - Manual (Page 92)

iPAQ Pocket PC H3800 Series Reference Guide 92
7
Troubleshooting
Getting Acquainted Tips
I cannot see anything on the screen
1. Make sure the screen is on
Press the power button
2. Make sure the Compaq iPAQ Pocket PC is connected to the AC adapter and the universal
cradle
Plug the AC adapter into an outlet
Insert the DC adapter plug into the universal cradle
Insert the AC adapter plug into the DC adapter plug
I cannot keep my battery charged
Always keep the Compaq iPAQ Pocket PC connected to a universal cradle or AC adapter
when you are not using it
In the backlight settings, slide the bar to the lowest level to conserve the most power
I do not see the charge light blinking when my Compaq iPAQ Pocket PC
is connected to the universal cradle
1. Make sure the universal cradle is plugged into an outlet
2. Make sure the bottom of your Compaq iPAQ Pocket PC is pushed firmly into the
universal cradle
3. Determine if the unit is fully charged.
The charge light does not blink when the unit is fully charged.
From the Start menu, tap Settings
Tap System
Tap Power
The backlight keeps turning off
The backlight turns off to conserve power
On the Battery Power tab, change the time the backlight stays on and choose to have the
backlight turn on when you touch the screen or push a button