Sharp cs-2850 - Manual (Page 15)

CALCULATION EXAMPLES
1. Set the decinnal selector as specified in each example.
The rounding selector should be in the "5/4“ position unless otherwise specified.
2. The grand total mode, constant mode, add mode, item count mode, and balance
mode selectors should be in the position (off position) unless otherwise specified.
3. Print mode selector should be in the “P” position unless otherwise specified.
4. If an error is made while entering a number, press the §§ or 0 key and enter
the correct number,
5. Negative values are printed with symbol in red.
Note: All totals and sub-totals may be used for further calculations. RE-ENTER
the number into the calculator by using a FUNCTION key and continue
the problem.
EXAMPLE:
Selector Operation Print Note
— F 123 [2 12300 +
— 6
-5
456 [D 456-00 +
- A
— 3
@ 57900
-2
-0 a
Hi 579-00 X Re-entry of total
2 (S 2- =
M 58-00 *
DATE MEMORY (only CS-2850)
The CS-2850, provided with date memory, allows date, number etc. to be stored once
and then recalled and printed as necessary.
Note: The date memory can also be used as a constant memory,
A. Print the date of March 5, 1993.
Selector
(1)
Operation
(2)
Display
(3)
Print
(4)
— F 3.05.1993 CB 3.05-1993 3 05-1993 (red)
— 6
— 5
0. 0- ♦
— 4
— 3 20 (i] 20.00 a
20-00 +
— 7 30 50.00 a
30-00 +
— 0 @ 50.00 a
50 00 *
3.05-1993 3-05-1993 (red)
13