Paper roll replacement – Sharp cs-2850 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PAPER ROLL REPLACEMENT
1. Liit the paper holder up. (See Fig. .1)
2. Fold the leading edge of the paper roll 3 to 5 cm. (Do not fold it slantwise.) (See Fig.
2
)
3. Insert the paper roll from the left side of the paper holder and make sure the paper
roll is set in the proper direction (with the paper feeding from the bottom) as shown
in the figure. (See Fig. 3)
4. Fold the paper holder down to the printer cover. Insert the leading edge of the paper
into the opening directly behind the print mechanism. (See Fig. 4)
5. Lift the paper holder up. Press the paper feed key and feed the paper under the
edge of the paper cutter. (See Fig. 5)
Rg. 2
11