Compaq MP2800 User Manual
Page 48
Care and Maintenance
48
Part Number: 216023-001 - Writer: Carey Gregg - Saved by: The Integrity Group
Pages: 5 Words: 867 Saved date: 09/22/0010:10 AM File Name: Ch05.doc
4. Use a coin to loosen the screw
➌ on the lamp module.
5. On the front of the lamp module, slide up the release latch
➍ to
disengage it from the projector base.
6. Pull out the lamp module
.
!
WARNING:
To reduce the risk of personal injury, do
not drop the lamp module or touch the glass bulb. The
glass may shatter and cause an injury if it is dropped.
Reverse the previous steps to replace the lamp module.
✎
After replacing the lamp module, remember to reset the
lamp hours in the on-screen menu.
CAUTION:
The lamp contains < 0.125 percent
mercury by weight. If the projection lamp breaks, the
mercury may be released into the atmosphere. Please
follow applicable federal, state, and local regulations
for disposal and/or recycling.