Compaq MP2800 User Manual
Page 14
Getting Started
14
Part Number: 216023-001 - Writer: Carey Gregg - Saved by: The Integrity Group
Pages: 18 Words: 2766 Saved date: 09/22/0010:37 AM File Name: Ch01.doc
4. Turn on the video source (computer, PC Companion,
videocassette recorder, etc.) and launch the software application
being used to display images on the projection screen.
If applicable, press the Function key on the computer
designated for external display.
✎
If there is a long delay between the time the startup screen
displays and the time the presentation software is launched,
the lamp may shut off and the projector will automatically
go into standby mode. If this happens, press the
Standby
button to power on the lamp.
✎
When the startup screen disappears, the video from the
attached computer displays. If there is no incoming video,
the “Check Video Cable” message will display on the
projection screen.