First wash cycle, Open the door, Put washing into the machine – Bosch WFB 1002 User Manual

Page 63: Close the door, Add detergent turn on the tap, Fig.®), Washing open the door

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

First wash cycle

Carry out the first wash cycle

without laundry

to remove any water left over from the factory

tests.

1. Check that the transit bolts have been re

moved from the back of the machine (see
installation instructions).

2. Turn the tap ON.

3. Pull the detergent drawer out as far as it will

go.

4. Pour half a measuring cup into compart

ment II. Do not use a special detergent for

délicates or woollens as these will create
too much foam.

5. Turn the programme selector clockwise and

set it to

Cottons / coloureds, normal (B).

6. Set the temperature selector

'^C.

7. Press the "ON/OFF" button.

The programme is started.

8. When the programme has ended, press the

"ON/OFF" button to switch the machine off.

Washing

Open the door

<> Pull the handle on the door towards you

(Fig.®).

Put washing into the machine

! Any items which have been pre-treated with

solvent-based cleaners, such as stain remo

vers and petrol-based agents must be aired

before they are put into the machine.

Explosion hazard!

! Before loading the machine, ensure that

there are no foreign objects nor trapped

pets in the drum.

O Place the washing into the drum so that'it is

folded out and loose, with a mixture of large
and small items.

Close the door

! When you close the door, make sure that

nothing is caught between the door and the
rubber seal.

O Close the door by pressing it shut until it

snaps into place with an audible click.

Add detergent

Turn ON the tap

This manual is related to the following products: