Color block quality and alignment check, Step a: color block quality check, Step 1 – Brother MFC-4820C User Manual

Page 8: Setting up the mfc

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

step 1

Setting Up the MFC

Color Block Quality and

Alignment Check

O After the cleaning cycle is finished, the LCD

shows;

Make sure the paper is loaded in the paper

tray.

Press the

Fax Start

key.

The MFC starts printing the PRINT
QUALITY CHECK SHEET (only during

initial ink cartridge installation).

Check in Step A

Check in Step B

Step A: Color Block Quality

Check

O The LCD shows:

Check the quality of the four color blocks

formed by the short lines printed on the
sheet.

(BLACK/CYAN/YELLOW/MAGENTA)

2 If all lines are clearand visible, press the ®

key on the dial pad to go to STEP B:

Alignment Check.
—OR—

If you can see missing short lines, press the

(T)

key on the dial pad and go to 3.

Poor

3 The LCD asks you if the print quality is OK

for each color. Press the® key or® key
on the dial pad.

When you have finished selecting the ®

key (YES) or the ® key (NO) for each
color, the LCD shows:

Press the ® key (YES), and then MFC

starts cleaning the colors.
After cleaning is finished, press the

Fax Start

key. The MFC starts printing the

PRINT QUALITY CHECK SHEET again
and goes back to the first step of STEP A.