Pioneer F-208RDS - Manual (Page 11)

PRESETTING STATIONS
Manual Station Name Memory
Using up to 4 characters, you can store a nanne of your choice for
preset FM/AM broadcast stations 1 to 30. Even if PS data is already
received using RDS, an FM or AM broadcast can still be mennorized.
In this case, the nnemorized name takes priority over the PS data
name.
1. Turn the 6 STANDBY/ON switch ON.
2. Select the desired broadcast station with the
CLASS button and STATION CALL button.
3. Press the CHARACTER/SEARCH button once to
select the Station name input mode.
"INPUT” lights in the display, and the mode switches to manual
memory.
4. While "INPUT" is displayed, turn the TUNING
knob clockwise or counterclockwise to input a
desired character.
Enter characters in the following way;
©The first character in the display changes while you turn the
TUNING knob. Select a character as desired, (see page 17)
©When you have selected your desired character, press the
MEMORY button.
This enters the first character and awaits input of the next
character for memorization.
Repeat this procedure until all four characters have been entered.
NOTES:
# If you perform no operations within about 5 seconds after
"INPUT" is displayed, the display returns to frequency indications.
0 Even if the station name contains less than four characters,always
input a space and repeat steps 4 (D and 4 (g).
0 When you want to change a memorized station name, after
selecting a desired broadcast station, register the new name using
steps 2 to 4.
0 For greater convenience, record memorized station names in the
STATION CALL button "memo" on page 17.
When erasing a memorized station name, use the
following procedure.
©Perform the steps 1 to 3 of "Manual Station Name Memory".
©While "INPUT" is displayed,turn the TUNING knob clockwise or
counterclockwise to display a space.
©Press the MEMORY button. (One space is input.)
©Repeat the step © three more times to input four space.
(The space lies between and "A".)
• 11