Kenmore 505 - Manual (Page 7)

PRODUCT SPECIFICATIONS
MODEL
305 Models 505 Models
154.330020 & 154.330030 154.330060 & 154.330070
Minimum gas consumption btu/h 15,000
Maximum gas consumption btu/h 180.000 Natural Gas
180.000 Propane Gas
199.000 Natural Gas
190.000 Propane Gas
Hot water capacity (Min - Max) * 0.6 - 7.5 GPM
(2.3 - 28.4 L/min)
0.6-9.4 GPM
(2.3 - 35.5 L/MIN)
Hot water capacity (45°F rise) 6.6 GPM (25.0 L/min) 7.4 GPM (28.0 L/min) Natural Gas
7.1 GPM (26.9 L/min) Propane Gas
Defauit Temperature Setting (no controiier) 120° F (49° C)
Temperature Controiier Defauit Temperature
Setting
104° F (40° C)
Maximum Temp Setting (Residential) Selectable at 120° F (49° C) or at 140° F (60° C)
Minimum Temperature Setting 98° F (37° C)
Weight 50 lb (22.7 kg)
Efficiency Rating 84%
Noise Level 49 dB
Electrical
Consumption Normal 65 W 79 W
Standby 2.0 W
Anti-Frost Protection 100 W
By-Pass Control Fixed Electronic
Minimum Gas
Supply Pressure
Natural Gas 5.0 inch W.C.
Propane 8.0 inch W.C.
Maximum Gas
Supply Pressure
Natural Gas 10.5 inch W.C.
Propane 13.5 inch W.C.
Type of Appliance Direct Vent, Temperature controlled continuous flow gas hot water system
Operation With Or Without Temperature Controls, Mounted In Kitchen, Bathroom, Etc.
Approved Gas Type Natural Gas Or Propane - Ensure Unit Matches Gas Type It’s Being Installed On.
Connections Gas Supply: 3/4" Mnpt, Cold Water Inlet: 3/4" Mnpt, Hot Water Outlet: 3/4"
Ignition System Direct Electronic Ignition
Electric Connections Appliance: Ac 120 Volts, 60hz. Temperature Control: Dc 12 Volts (Digital)
Water Temperature Control Simulation Feedforward And Feedback.
Water Supply Pressure Minimum Water Pressure: 20 Psi (Recommended 30-80 Psi For Maximum Performance)
Maximum Water Supply Pressure 150 PSI
Temperature Control Cable Non-Polarized Two Core Cable (Minimum 22 Awg)
Energy Star Qualified Yes Yes
* Minimum flow may vary slightly depending on the temperature setting and the inlet water temperature.
Specifications are subject to change without prior notice.
The maximum inlet gas pressure must not exceed the value specified by the manufacturer. The minimum value listed
is for the purpose of input adjustment.
305 & 505 Indoor Manual