Kenmore 505 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Temperature Ranges
This water heater will attempt to provide hot water at the temperature setting even when the water flow is varied or
when more than 1 tap is in use. The water heater can deliver water at only one temperature setting at a time. The
available temperatures for a given model are provided below.
Table 11:
Model
Temperature Settings Available (°F)
305 Series
98
100
102
104
106
108
110
115
120
125*
130*
135*
140*
505 Series
98
100
102
104
106
108
110
115
120
125*
130*
135*
140*
Temp, in Celsius
37
38
39
40
41
42
43
46
49
52
54
57
60
* Re-setting the Maximum Temperature
Temperature settings from 125-140 °F (52-60 °C) are available by setting dip switch 6 to ON in the SW1 bank of 8
dip switches.
Table 12:
Suggested temperatures are:
These temperatures are suggestions only.
Kitchen 120°F (49°C)
A temperature lower than 98°F (37°C) can be obtained
at the tap by mixing with cold water.
Shower 98°- 110°F (37° - 43°C)
To change the temperature scale from Celsius to Fahrenheit or visa versa, press and hold the “On/Off” button for 5
seconds while the water heater is OFF.
Setting Controller to Mute
To eliminate the beeps when keys are pressed or to turn the beeps back on, press and hold both the A and T
buttons until a beep is heard (approximately 5 seconds).
26
305 & 505 Indoor Manual