Kenmore 122.16641900 - Manual (Page 9)

Installing Grill Head
1. Be sure grill cart doors are closed to stabilize cart.
Remove grill head from carton. Place onto cart from
above as shown in Figure 6.
CAUTION: Grill head is heavy. To avoid injury,
obtain the help of an assistant for this step. Also,
make sure doors remain closed when placing grill
head onto cart. DO NOT open doors until grill head
is securely mounted to cart.
2. Align screw holes of grill head with screw holes of
cart.
3. From back of cart, attach the grill head to the left and
right side (Fig. 7A) panels using (4) 1/4 x 3/8" Phillips
head screws and (4) 1/4" lock washers.
4. From the front of the cart, attach the front of the grill
head to the left and right side panels (Fig. 7B) using (2)
1/4 X 3/8" Phillips head screws and (2) 1/4" lock
washers
Figure 8
Installing Side Burner & Side Shelf
1. Assemble side shelf & side burner front panel using
(4) 5/32 X 3/8” Phillips head screws with (4) 5/32" lock
washers. (Fig. 8)
2. Remove (1) preinstalled 5/32 x 3/8 Phillips head
screw and (1) 5/32 lock washer from control panel. See
Figure 9 inset.
3. Screw (2) 1/4 x 1/2" Phillips head screws and (2) 1/4"
lock washers into side of grill head as shown. Do not
screw in fully; leave 1/4" extended for shelf assembly.
(Fig. 9)
4. Through side burner shelf screw holes, hang side
burner on two screws. (Fig. 10)
Figure 6
Figure 9
^ f
Figure 10
Figure 7