Kenmore 8907 - Manual (Page 5)

INSTALLATION INSTRUCTIONS
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Mobile home installations require metal exhaust system
hardware available for purchase from your local Sears store or
Sears Service Center. For further information, please call 1-800-
4-MY-HOME® (1-800-469-4663).
Pliers Cutting knife Nut drivers
Level
flat-blade
screwdriver
Duct tape
Parts supplied
Remove parts package from dryer drum. Check that all parts are
included.
□
MANUAL-BOOK
(DC68-02865A)
DIE-RACK DRY
(DC61 -02773A)
“Y”-CONNECTOR
(DC97-15103A)
HOSE WATER
(DC97-15692A)
SHORT INLET HOSE
(DC97-15249A)
RUBBER WASHER
(DC62-40178A)
NOTE: Do not use leveling legs supplied with dryer if installing
on a pedestal..
Pedestal
You have the option of purchasing a pedestal for this dryer. You
may select a
14”(35.5cm) pedestal. Remember that the pedestal
will add to the total height of the unit. The pedestals are available
in several colors.
To order, call your local Sears store. For further information,
please call 1-800-4-MY-HOME® (1-800-469-4663).
Pedestal Height
14"(35.5cm)
Color
Night Sky Blue
Model Number
19106
14"(35.5cm) Tango Red 19109
Stacking Kit
Are you planning to stack your Kenmore washer and dryer?
To do so , purchase an optional stacking kit (Model:18888) from
your local Sears store or Sears Service Center.
Follow instructions included with the kit.
Side Vent Kit
Use the Side Vent Kit (Model : 18004) for venting directly on
either side or on the bottom.
Follow instructions included with the kit.
o
Vent cap Elbow Duct Back-Left
''C’d ''^'0
Duct Back-Right Duct Front Duct Front-Bottom
[BETTER]592-89075-02865A-02_EN.indd 5 2011-03-23 ¿ББЬ 9:49:04