Temp selection button, Cycle signal selection button, Wrinkle guard – Kenmore 8907 User Manual
Page 17: Mixed load bell, Rack dry, Start/pause selection button, Adjust time, Power button, Selection, Button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Temp Selection Button
To select the correct temperature for the load, press the Temp
button. An Indicator light will Illuminate next to the desired
temperature. Press the button repeatedly to scroll through the
settings.
Temperature
Tempèratuie
■ High - For sturdy cottons or those labeled Tumble Dry.
■ Medium - For permanent press, synthetics, lightweight
cottons, or Items labeled Tumble Dry Medium.
■ Low - For heat sensitive Items labeled Tumble Dry Low or
Tumble Dry Warm.
■ Extra Low - Provides the lowest heated dry temperature
possible.
Time
Selection
Button
When using Manual Dry cycles, time can be adjusted by
pressing the time selection button.
During the Sensory Dry cycle, the time light Indicator Is
off
because exact drying times are determined by fluctuating
humidity levels.
Time
Cycle Signal Selection Button
When the cycle Is complete, a chime will sound.
When the Wrinkle Guard option Is selected, the chime will sound
intermittently.
Adjust the volume of the chime or turn it off by pressing the
Signal button.
Press the button repeatedly to scroll through the choices.
Wrinkle Guard
Wrinkle Guard provides approximately 90 minutes of intermittent
tumbling in unheated air at the end of the cycle to reduce
wrinkling. Press the Wrinkle Guard button to activate this feature.
The indicator light above the pad will illuminate when Wrinkle
Guard Is selected.
The load Is dry, and can be removed at any time during the
Wrinkle Guard cycle.
Mixed Load Bell
This Is an alarm that notifies the user when the average
dry level Is damp dry
(80%
dried). This Is useful when the
laundry contains various types of clothing you do not want
to dry completely. An alarm sounds for five (5) seconds while
continuing to perform the cycle.
This function can only be selected in the Sensor Dry course, and
the dry level can only be selected from among Normal Dry, More
Dry, and Very Dry.
Mixec
Loac
Bel
Brassée
mixte
Rack Dry
Rack Dry Is available at Time Dry cycle. Temperature will be set
only to Extra Low.
(See
next page for detail.)
When the cycle Is complete, a chime will sound.
When the Wrinkle Guard option Is selected, the chime will sound
intermittently.
Supportile
séchage
Start/Pause selection
Button
Press to pause and restart programs.
Cyde Signal
Signdte programme
Adjust Time
Time can be added or subtracted from the automatically set
times in the Manual Dry cycles (Time Dry, Air Fluff cycles).
To add or subtract time from the cycle, press the Adjust Time
arrow pad up or down until the desired time is displayed.
Timed _
ACydesfl
Adjust^
Timed
VCydesn
Adjust^
AjusL
du temps
Ajust.
dll temps
Start/Pause
Dèiiiarrei/ Pause
r
Wl
Power button
Press once to turn your Dryer on, press again to turn it off.
If your dryer Is left on for more than 10 minutes without any
buttons being touched, the power automatically turns off.
Power
Mise en Marche
(!)
V____ y
17
[BETTER]592-89075-02865A-02_EN.indd 17
2011-03-23 ¿AAЬ 9:49:24