Drum light – Kenmore 8907 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

A function to prevent children from playing with your dryer.

Setting/Releasing

If you want to set or release the Child Lock, press both the Time

and Cycle Signal buttons simultaneously for 3 seconds.

How to Set:

1. It can be set while your dryer is running.

2. Once you set the Child Lock function, no button, except for

the Power button, will respond until you release the Child

Lock function.

3. The Child Lock indicator will be lit.

NOTES:

1. If the dryer is powered on again, the Child Lock function

stays on.

2. To release that function, follow the instructions above.

NOTE: When other buttons, except for the Power button, do not
respond, check the Child Lock indicator.

Child Lock

)

Time

Cycle

Signal

Signa de programme

Drum Light

Lights the dryer drum while the dryer is running.

Setting/Releasing

If you want to set or release the Drum Light, press both the Dry
Level and Temp, buttons simultaneously.

It can be set while your dryer is not only running but also when it
is stopped.

If you do not turn the Drum Light off within 5 minutes of turning it

on, it is automatically turned off.

Installing the drying rack

1. Open the Dryer door.

2. Position drying rack in tumbler, placing the front lip of the

drying rack on the top of the lint filter.

Place the rear legs in the two recessed areas of the dryer’s

back wall then push down the middle of the drying rack to

fix.

4. Place the items to be dried on the rack, leaving space

between them so air can circulate.

5. Close the Dryer door.

Use the Time Dry cycle. Select the time according to the

moisture and weight of the items. Start the Dryer. It may be
necessary to reset the timer if a longer drying time is needed.