Dryer use – Kenmore 110.8509# User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DRYER USE
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammabie on It (even after washing).
Failure to follow these instructions can result in death,
explosion, or fire.
M
I
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it {including cooking oils).
Items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death
or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
Follow these basic steps to start your dryer. Please refer to
specific sections of this manual for more detailed information.
1. Clean lint screen before each load. See “Cleaning the Lint
Screen.”
2. Place laundry in dryer and shut door.
3. Press the selected cycle pad. The preset settings for Auto Dry
Cycles or Manual Cycles will glow. The estimated or actual
cycle time {in minutes) will show in the display.
To use an Auto Dry Cycle
■ Select an Auto Dry Cycle.
■ Select AUTO DRY LEVEL to adjust how dry you want the
load. As the cycle runs, the control senses the dryness of
the load and adjusts the time automatically for the
selected dryness level.
■ Select the desired Options.
To make changes during an Auto Dry Cycle:
■ Adjust Options.
NOTE: Auto Dry Level selections can be made only while
using Auto Dry Cycles. You can select a different dryness
level, depending on your load, by pressing Auto Dry Level
and choosing More or Less. Selecting More or Less
automatically adjusts the sensed time needed.
• MORE
• LESS
AUTO DRY
LEVEL
PRESS & HOLD 3
SECONDS TO LOCK/
UNLOCK CONTROL
20