Brother AX-10 - Manual (Page 12)

MARGIN SETTING
HITEC INDUSTRY CONSULTANTS
115 Sansone Street
San Francisco, CA 94104
Mr. J. C. Bartel
2345 West Brady Avenue
Duluth, Minnesota 12345
Dear Mr , Bartel,
We understand that you are in the market for an electronic
typewriter and we would like to cake this opportunity to
strongly suggest the new AX-10 by Brother.
The AX-10 is designed for portable efficiency and is alone
in its class.
Both Pica pitch which types 10 characters per Inch, and
Elite pitch that types at 12 characters per inch can be
selected quickly and easily.
A repeat function lets you print a continuous series of
characters by simply holding down a single key------------
In addition, the following functions are also readily
available:
When the power of the typewriter is switched ON, the left margin is set to position 10 and the right margin
is set to position 75 of Pica pitch. The margin can be freely changed by following the procedures outlined
below;
Note: The minimum number of characters between the margins is 20 for Pica pitch, and 24 for Elite pitch.
MARGIN RELEASE
+
The margin release key is used to move past an existing margin either temporarily for typing or in order to
set a new margin. When a presently set margin is reached the carrier will stop. To continue carrier
movement past the margin, press the margin release key.
-- - W e u n d e r s t a n d t h a t y o u a r e i n t h e m a r k e t -- ^
0