To adjust sliding shelves, To adjust cantilever shelves, Loomng inside – Kenmore 241858201 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
13
LooMng Inside;
CAUTION
To
avoid personal injury or property damage, handle :
tempered glass shelves carefully. :Shelves may: break suddenly if
nicked, scratched, or exposed to sudden temperature change.' : :
SHELF ADJUSTMENT
Refrigerator shelves are easily adjusted to suit individual needs. Before adjusting
the shelves, remove all food.
To adjust sliding shelves:
^ Remove shelf by pulling forward to stop position.
Q Lift front edge up and pull out.
Replace the shelf on any pair of rails in opposite order and manner of removal.
To adjust cantilever shelves:
NOTE: Cantilever shelves are.supported at the back of the refrigerator.
Cantilever shelves are available in either glass or wire..................................
Q Lift front edge up.
Q
Pull shelf out.
Replace the shelf by inserting the hooks at rear of the shelf into the wall
bracket. Lower the shelf into the desired slots and lock into position.
SpillProoP’^
glass shelves (some models) catch and hold accidental spills. In
some models, the
SpillProof^
shelves slide out for easy access to food and
tor fast cleaning. The shelves slide out independently of the cantilever
brackets. Just pull the front of the shelf forward. The shelf can be extended
as far as the stopper will allow but it is not removable from the cantilever
bracket.
Sliding Wire Shelf
Cantilever Glass Shelf - Fixed and Sliding
11