How to remove freezer door handle, How to replace freezer door handle – Kenmore ELITE 795.7103 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
NO TE:
Removing the doors is always recommended when it is necessary to move the refrigerator through a narrow
opening. If it is necessary to remove the handles, follow the directions below.
HOW TO REMOVE FREEZER DOOR HANDLE
NOTE:
Handle
appearance
may
vary
from
illustrations
on
this page.
Removing Freezer Drawer Handle
Loosen the set screws located on the lower side of the
handle with
a
Vs
in. (3.1 mm) Allen wrench and remove
the handle.
NOTE:
If the handle mounting fasteners need to be
tightened or removed, use a % in. (6.4 mm) Allen
wrench.
HOW TO REPLACE FREEZER DOOR HANDLE
NOTE:
Handle appearance may vary from illustrations on
this page.
Replacing Freezer Drawer Handle
Place the handle on the door by fitting the handle
footprints over the mounting fasteners and tightening
the set screws with
a
Vs
in. (3.1 mm) Allen wrench.
NOTE:
If the handle mounting fasteners need to be
tightened or removed, use a % in. (6.4 mm) Allen
wrench.
12