To set or change thè temperature for baking, To set the controls for normal baking, To set control for oven lockout – Kenmore 790.4885 User Manual
Page 19: Setting wail oven controls
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Note: The time of day must first be
set in order to operate the oven.
Setting Wail Oven Controls
•
0
1
©
1
Cook
Time
•
•
•
Select
Clean
1
Timer
1
1 Set/Off 1
Delay
Start
OVEN
PREHEAT
DOOR LOCKED
Add 1
Minute
.STOP ,
^ LOCKOUT
Warm &
Hold
To Set or Change thè Temperature for Baking
The oven can be programmed to bake at any temperature from 170°F to 550°F (77°C to 288°C).
To Set the Controls for Normal Baking:
1. Press Bake. “------------appears in the display.
Within 5 seconds, press the or "v. The display will show “350°F (177°C)”. By pressing and holding -A. or "v, the
temperature can then be adjusted in 5°F increments (1°C if the control is set to display Celsius).
10 seconds after the xv or "v pad is released, the oven will begin heating to the selected temperature. When the
displayed temperature reaches the desired baking temperature, the preheat indicator light will turn OFF.
2
.
3.
4. To cancel the baking function, press
To Change the Oven Temperature after Baking has Started:
Press the ^ or "v pad to increase or decrease the set temperature.
To Set Control for Continuous Bake or 12 Hour Energy Saving:
The oven control has a built-in 12 Hour Energy Saving feature that will shut off the oven if the control is left on for more
than 11 hours and 59 minutes. The oven can be programmed to override this feature for continuous baking.
To set control for continuous baking:
Timer
1. Press and hold
Set/off down
for 7 seconds until tone is heard.
2. Within 5 seconds, press the or "v pad to switch between Continuous Bake and 12 Hour Energy Saving mode.
The display will show either - hr” or “12hr”.
If - hr” appears, the oven will be set to continuous baking. If “12hr” appears, the oven is set to 12 hour energy
saving mode.
3. Wait 5 seconds or press
to return to normal operating mode.
To Set Control for Oven Lockout:
The control can be programmed to lock the oven door and lock the oven control pads.
To Set Control for Oven Lockout feature:
1. Press vC/ and hold for 3 seconds. The “Door Locked” indicator light will glow and the motor driven door lock will
begin to close automatically. DO NOT open oven door while the indicator light is flashing. Allow about 15 seconds
for the oven door to lock. Once the oven door is locked, “Loc” will appear in display.
2. To cancel the Oven Lockout feature, press
resume normal operation.
and hold for 3 seconds. The control will unlock the oven door and
19