For a silent control panel, Wail oven control pad features, Temperature conversion – Kenmore 790.4885 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Wail Oven Control Pad Features
Note: The appearance of your oven control may differ slightly from the one illustrated below. However, all functions
are the same. Also, push buttons or pads may be shaped differently than those appearing in this Use and Care
Guide.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.
familiar with the various functions of the oven as described below.
For satisfactory use of your oven, become
OVEN
CLOCK SET
COOK TIME
UP and DOWN ARROWS PADS
INTERIOR
PAD Used to
PAD Used
Used along with the function pads
LIGHT PAD
set the time
to enter the
to select oven temperature, cook
Used to turn
of day.
length
of
the
time, start time (when programming
oven interior light
\
baking time. an automatic start time), time of day,
ON and OFF. \
\
\ clean time and minute timer.
TIMER SET/OFF PAD
Used to set or cancel the
minute timer. The minute
timer does not start or
stop cooking. Also, TIME!
SET/OFF Pad is used to
set the Continuous Bake
Feature.
SELECT CLEAN PAD^
Used to select the Self
Cleaning cycle. A 2, 3
or 4 hour Self-Clean
time may be selected.
DELAY START PAD Used to set the
desired start time for baking. May be
used with COOK TIME to program a
delayed bake cycle or to program a
delayed clean cycle.
ADD 1 MINUTE PAD Used to add
1 minute to the Timer Countdown.
This feature works with the Kitchen
Timer only and does not affect any
cook time or start time functions.
\ •
I I
Cook
i I
Time
•
•
Select
j Timer I
Delay
^^Clean
I
Set/Off
I
Start
BAKE PAD—Used
to select the bake
function.
FEATURE
INDICATOR
LIGHTS— These
lights show which
Bake I
Broil._
——~ BROIL PAD— Used
•
to select the variable
broil function.
I STOP
J
Warm &
Hold'-....
WARM & HOLD
ft
£i LOCKOUT
PAD
—
Used to set
the Warm & Hold
feature.
OVEN, PREHEAT & DOOR LOCK LIGHTS* The “Oven” light
will glow each time the oven is turned on. The “Preheat” light
will glow when the oven is first set to operate, or if the desired
temperature is reset higher than the actual oven temperature. The
“Door Locked” light will flash until the door locks when the self
clean cycle is in use. It glows constantly after the door locks.
STOP PAD— Used to clear any
function previously entered except
the time of day and minute timer.
Press STOP to stop cooking. Also
the STOP pad is used to activate
oven lockout setting.
*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and
during preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature.
When preheat indicator light turns OFF, your oven is ready.
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed
for silent operation.
Delay
1.
To tell if your oven is set for normal or silent operation press and hold start for 7 seconds. or “SP” (speaker)
appears in the display.
2.
Within 5 seconds, press the or "v* pad to switch between normal sound operation and silent operation mode.
The display will show either or “SP ”.
3.
Wait 5 seconds to return to normal operating mode.
If “SP ” appears, the control will operate with normal sounds and beeps. If -”” appears, the control is in the silent
operation mode.
Temperature Conversion
(Fahrenheit / Celsius)
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (77°C to 288°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press and hold Broil for 7 seconds until °F or °C appears in the display.
2. Press the or "v pad to change °F to °C or °C to °F.
3. Wait 5 seconds to accept the changes or press V_y to reject the changes.
17