Function indicator lights, Oven control keypads, Setting clock – Kenmore 790. 7260 User Manual
Page 10: To set the clock, Important note, Setting silent or audible control mode, Oven control functions, Setting oven controls
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Oven Control Functions
For satisfactory use of your oven, become familiar with the various key pad functions and features of the oven.
•
•
•
•-----
©
Cook
Time
(2)
H
; Bake
Broil
(8)
[9J
•
•
(5>
OVEN
•
Timer :
Set/Off ^
Delay
Start
{6jm
(
7 ) 0
PREHEAT
DOOR LOCKED
V
; ■
STOP
Select
Clean
(3)
(4J
'.
(ii
LOCKOUT
(11)
Function indicator lights
- These indicator lights
located above the key
pad will glow when that
function is active.
Oven control keypads
1.
Clock
- Use to set the time of day.
2.
Cook Time
- Use Cook Time key pad when adding any
Cook Time instructions.
3.
Timer Set/Off
- Use to set or cancel the timer. Timer
Set/Off is used to set the continuous bake feature.
4.
Delay Start
- Use with Bake and Select Clean functions
to program a delay start bake or delay start self
cleaning cycle.
5.
OVEN indicator light
- The OVEN light will glow each
time the oven turns on to maintain the set oven
temperature.
6.
PREHEAT indicator light
- The PREHEAT light will glow
when the oven is first set for cooking and remain on until
the oven reaches the set temperature.
7.
DOOR LOCKED indicator light
- The DOOR LOCKED
light will glow when the oven door locks or unlocks, oven
lockout is active or when Select Clean is active.
8.
Up / Down
arrow key pads - Use with the function key
pads to accept settings and to adjust temperature and
times.
9.
Bake
- Use to select Bake function.
10.
Broil
- Use to select variable broil function.
11.
STOP
- Use to cancel any active oven function except
clock or timer. Use to activate or cance I
OVEN
LOCKOUT.
12.
Select Clean
- Use to select a 2, 3 or 4 hour Self-Clean
cycle time.
Setting Oven Controls
Setting Clock
When the appliance is first powered up or when the power
supply to the appliance has been interrupted, 12:00 will
flash in the display (See Fig. 1). The time of day must first
be set before operating the oven.
To set the clock:
1.
Press
key pad once (do not hold key pad down).
2.
Within 5 seconds, press and continue pressing the
or N/ key pad until the correct time of day appears
in the display. Release key pad.
Important note:
The time of day cannot be changed when the oven is set
for cooking or when Select Clean is active.
Setting silent or audible control mode
The oven control is factory preset with audible tones active.
The control may be programmed for silent operation or with
normal audible tones.
To block the control from sounding when any key pad is
pressed, press and hold
Delay Start
key pad until the
control beeps once (about 6 seconds).
To return to the audible control mode, press and hold
Delay
Start
key pad until the control beeps once (about 6
seconds).
10