beautypg.com

Starting the select self-clean cycle, To set the controls for a self-clean cycle, Self-cleaning – Kenmore 790.7863 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Self-Cleaning

(contd)

starting the Select Self-Clean Cycle

For satisfactory results, use a 2 hour Self-Clean cycle for light soils and a 3 hour cycle for average or a 4 hour cycle for
heavy soils. NOTE; The kitchen area should be well ventilated using an open window, ventitlation fan or exhaust hood

during the 1st Self-Clean cycle. This will help eliminate the normal odors associated with the 1st Self-Clean cycle.

To Set the Controls for a Self-Clean Cycle:

1. Be sure the clock shows the correct time of day.

2. Press

''-----------" appears in the display.

3. Press the or 'V once. "3:00" appears in the display for a 3 hour cycle. To change to a 2 hour cycle press "V .

"2:00" appears in the display or to select a 4 hour cycle press W . "4:00" appears in the display.

As soon as the controls are set, the motor driven lock will begin to close automatically and the “LOCK” indicator light
will flash. DO NOT open the oven door while the light is flashing (it takes about 15 seconds for the oven door to lock).

4. "CLn" will appear in the display during the Self-Clean cycle and the "LOCK" light will glow until the Self-Cleaning cycle

is complete or cancelled and the oven temperature has cooled.

When the Self-Clean Cycle is complete;

1. The time of day or "End" will appear in the display window and the “Clean” and "LOCK" light will continue to glow.

2. Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened.

3. If “End” is in the display and the Select Clean indicator light remains ON, press (S). The time of day will appear in the

display.

NOTE; When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel.

Stopping or Interrupting a Select Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a Self-Cleaning cycle:

1. Press (S).

2. Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened.
3. Restart the Self-Clean cycle once all conditions have been corrected.

^CAUTION

I To avoid possible burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the side of

the oven when opening the door to allow hot air or steam to escape.

ÜÉt CAUTION

I DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and avoid

possible burns when opening the door after the Self-Cleaning cycle has completed. The oven may still be VERY HOT.

15

This manual is related to the following products: