Kenmore 790.7863 - Manual (Page 10)

Oven Control Functions
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. Forsatisfactory use of youroven, becomefamiliarwith
the various pad functions of the oven as described below.
CLOCK SET
PAD—
Used
to set the
time of day.
TIMER ON/OFF
PAD— Used to set
or cancel the minute
timer. The minute
timer does not start
or stop cooking.
Aiso,
^
TIMERON/OFFpad
is used to set the
Continuous Bake
feature.
BROIL PAD— Used to
select the variable broil
function.
SELECT SELF-CLEAN
PAD — Used to select the
Self-Cleaning cycle. A 2,
3 or 4 hour Self-Clean
time may be selected.
UP and DOWN ARROW PADS— Used along
with the function pads to select oven
temperature, time of day. clean time and
minute timer.
Select
[■iSj " *
' Oven
I Preheat
' Door Looked
OVEN, PREHEAT & DOOR LOCKED LIGHTS* — The "OVEN" light
will glow each time the oven turns on to maintain the set oven
temperature. The
"PREHEAT" light will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The
"DOOR LOCKED" light will flash
when the oven door locks and unlocks or when using the Self­
Clean cycle or the oven door lockout is activated. The indicator light
will glow constantly after the door locks.
FEATURE INDICATOR
LIGHTS
— These light to
show which feature is in
use.
BAKE PAD— Used to
select the bake function.
STOP/CLEAR PAD—
Used to clear any
function previously
entered except the time
of day and minute timer.
Press STOP/CLEAR to
stop cooking. Also the
STOP/CLEAR pad is
used to activate Oven
Lockout setting.
*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during
preheat. This is normal and indicatesthat the oven is cycling to maintain the selected baking temperature. When the
preheat indicator light turns OFF, your oven is ready. ................
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press s™'. "------- " appears in the display.
2. Press and hold the until "HI" appears in the display.
3. Press and hold until °F or °C appears in the display.
4. Press the or N/' to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating mode.
10