Kenmore 415.161278 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sideburner Bezel, Sideburner, Sideburner Knob and Ignitor Wire.
: Position valve behind fascia and line up holes.
Insert (1) of the #8-32x3/8” stainless steel screws, do not fully tighten.
Slip bezel under screw inserted and position as shown (A).
Line up other hole and insert screw #8-32x3/8” through bezel and into valve.
Tighten both securely.
Place sideburner into shelf. Make sure valve is inside sideburner tube. Attach sideburner with (2) #8-32x3/8” screws to the drip pan
as shown (B).
Under sideburner shelf, install burner clip to sideburner tube and valve as shown (C).
Press sideburner control knob onto stem (D).
Under sideburner shelf, attach sideburner ignition wire to electrolde as shown (E).
Looking underneath sideburner assembly
Valve
Sideburner Knob
K
¥
■
I
■ Sideburner Electrode
\
Sideburner Ignitor Wire
/
57
#8-32X3/8” SS Screw
Qty:2
45
#8-32X3/8” Screw
Qty:2
20
*464310808*464310608