5 r 0 m, Water softener start up, C. program the timer – Kenmore 625.38816 User Manual
Page 6: Fig. 2 display
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/665543/6/background.png)
j j j jj j-iaj j j j jjj j j jjj j jjj j ^ pi . I II J|\l n
-Ij-ijjjjjjjjjjjjjjjjjjjjjj
I IV^I^ I
EJJJJJJ
4
Jjjjjjjjj^jJJJJJJ.
!JJJJJ444JJJ444J44J4JJjjj,
FJ
JJ.IJ
4444
J j j J
4
J J
4
J
444
.
WATER SOFTENER START UP
C. PROGRAM THE TIMER
FIG. 2
display
UP button
Customer Assistance
1-800-426-9345
BECHARGE TONIGHT
RECHARGE NOW
ON/OFF-HOLD button
(Recharge Tonight-Now)
DOWN button
SELECT button
When the transformer is plugged in, a model code,
and a test number (example: S3.0) show in the face
plate display for 4 seconds. Then, 12:00 AM and
PRESENT TIME begin to flash.
UltraSoft 100
CODE
5
REE
IC-UU
PRESENT TIME
UltraSoft 150
CODE
5R0M
53r
U
I
□■nf'^un
IC'UtJ
[PHESEMT TIME___________
Notes:
If SR - - shows in the display, press the UP 0 or
DOWN 0 button until SR22 or SR24 shows. Then,
press the SELECT button to set, and change to the
flashing PRESENT TIME display.
To check the model code, unplug the transformer at
the wall outlet and plugin again, if other than SR22
or SR24 shows, see page 5-3 to reset.
SOUND "BEEPER": A "beeper" sounds while
pressing buttons for timer set-up. One beep signals
a change in the face plate display. Repeated beeps
mean the timer will not accept a change from the
button you have pressed, teUing you to use another
button. For example, while setting the hardness
(step 2), the beeper sounds repeatedly when the dis
play reaches 1 using the DOWN button, or the high
est hardness setting using the UP button.
SET PRESENT TIME OF DAY
If the words PRESENT TIME do not show in the dis
play, press the SELECT button (FIG. 2) until they do,
or see the previous notes.
■ Press the UP / DOWN buttons to set the present
time. Press UP to move the display ahead; press
DOWN to move the time backward.
If the present time is between
noon and midnight, be sure PM
shows.
If the present time is between
midnight and noon, be sure AM
shows.
Each press of the UP /DOWN buttons changes
the time by one minute. Holding the buttons in
changes the time rapidly.
1 - 3
Problems, Questions? Call 1-800-426-9345 Kenmore Water Line