FRIGIDAIRE Washer/Dryer - Manual (Page 6)

WsLshing Procedures
(ocstiiiuedl}
61 Addlaundxy load to washer.
• Diry load level should not be higher than tcp row of holes inwashtub.
Do not overload washer.
• Do not put items on top of agitator or wrap them around it. Load itans
ssiLy.
• Ctmbine large andsmall itaiB ina load. Load large itetiB first. Large items
should not be mere than half the total wash load.
• When washing a single heavy item, add 1 or 2 towels to balance the load.
7. If desired, add liquid fabric softener to Fabric Softener
Dispenser
FcariBodelswithabuilt-indiEpenser (seepicturebelowto the left):
L Add liquid softener to the dispenser, following fabric softener label
diiecticns.
2 Adimtertohringliquidleveltofilllinecndispensercap.
3. Remove the dispenser f ran the agitator after each use. Rinse both cap and
cup withvarmva.ter. Replace dispenser in the agitator.
IMPORTANT: Do not step and restart washer during a spin when using the
fabric softerErdi^Denser.
Pc»:iDodelswithax«movable dispenser (seeplctsjxehelowto the left):
1 Attachfahricsoftmerdi^iaisertotcpof agitatarbyprossirgdewngently.
2 Addsoftenertothedispaiser, following fabric softsier label directierB.
3. Add water to bring liquid level to tep of the peg in the center of the erp.
4 Removethedisjpnserfrantheagitatoraftereachuse. Rinsehothlidand
bowl thoroughly with warm water. Reassemble and place dispenser on
agi tator or store itrearty.
IMPORTANT: Do not step and restart washer during a spin when using the
fabric softsierdi^Denser.
Forscdelawithouta fabric softener dispenser, follow fabric softener
label directions. Adi diluted fabric softener to the final rinse. Donotpour
fabric softener directlyon the wash load.
a Set cycle selector knob and washer controls according to
type, size, andsoil levt^of eacbload, and detergent used.
sTtesfaerCperatingDastruCticns card for your specific model controls.