Kenmore 795.7937 - Manual (Page 10)

REFRIGERATOR INSTALLATION
REPLACE REFRIGERATOR DOOR
• Set door onto Bottom Hinge Pin.
• Piece Hinge Pin of Middie Hinge Bracket inside
Hinge Pin Insert on top of door (Fig. 7). Hoid door
in piece and iine up the Middie Hinge Bracket with
the hoies in refrigerator housing.
Piece Upper Hinge’s Pin in the top of freezer door
and iine up the Upper Hinge with hoies in top of
refrigerator. Use the 3 bolts to replace Hinge (Fig. 10).
Carefuiiy force-fit Top Hinge Cover back into piece
over Hinge (Fig.11).
Use the 2 boits and philiips screw to refasten
the Middie Hinge Bracket and door to the
refrigerator housing. (Fig. 8).
REPLACE FREEZER DOOR
• Set the freezer door onto the Middie Hinge Pin
(Fig. 9).
A WARNING
ELECTRICAL SHOCK HAZARD
Before you begin, either unplug the refrigerator or turn
off power at the circuit breaker or fuse box. Remove
food and any Adjustable Door or Utility Bins from doors
Failure to do so could result in death or serious injury.
REVERSING DOORS
You may find it more convenient to have the doors
converted from the left-opening type (factory installed)
to the right-opening type. Directions refer to the right
side as the side on your right as you face the unit.
TOOLS NEEDED
• 10mm or 13/32-inch socket wrench
(with 2-inch extension for bottom door hinge)
• No. 2 Phillips head screwdriver
• V a inch socket wrench
• Flat-head screwdriver for prying
10