Instructions, Press, Display – Kenmore 790-.9663 User Manual
Page 28: Setting oven controls, Lir° iu j ij, 3 )(t3( 5 display, Ioen
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The
BAKE
OVEN COOKTIME
and
DELAY START
(|^ pads control the
Delay Start
feature. The
automatic timer of the
DELAY START
feature will turn the oven ON and OFF at the times you select.
Setting Oven Controls
• Setting Delay Start
Setting Delay Start
INSTRUCTIONS
To program the oven for a Delay Start and to shut off
automatically (example for baking at 375°F for 50
minutes and starting at 5:30):
1.
2
.
3.
4.
5.
6
.
Be sure that the clock is set with the correct time of day.
Arrange interior oven rack(s) and place the food in the oven.
Press (^) (See Fig. 1)
Enter the desired baking time using the number key pads by
pressing
{See Fig. 2). Note: Baking time may be
set for any amount of time from 1 minute to 11 hours and 59
minutes.
Press (See Fig. 3).
Press (IS) (See Fig. 4).
7. Enter the desired start time using the number pads
CD®®. (See Fig. 5)
8. Press
. (See Fig. 6)
9. Press (^Ba^ . (See Fig. 7)
10. Press
CT)CT^CS
11. Press
(See Fig. 8}
Note: Once
Delay
Start has started, press
to display the
bake time remaining. Once the
Delay Start
has started baking, a
long beep will sound when the oven temperature reaches the set
temperature.
Press when baking has finished or at any time to cancel the
Delay Start
feature.
When the set bake time runs out;
1.
"End"
will show in the display. The oven will shut off
automatically (See Fig. 9).
2. The control will beep 3 times. The control will continue to beep 3
times every 30 seconds until is pressed.
PRESS
DXD®
3 )(T3( 5
DISPLAY
Rg.1
_n
■JU
Fig. 2
Fig. 4
Fig. 5
!■_
TIHED DELAY
in
iu
BAKE
Fig. 6
in______
IU
TIMED DELAY
BAKE
Fig. 7
M
!■_
TIMED eaAY
in
lir°
iu J IJ
BAKE
Fig, 8
iOEn
Fig. 9
NOTE: If your clock is set for normal 12 hour display mode the
Delay Start
feature can never be set to start more than 12
hours in advance. To set the
Delay Start
12-24 hours in advance see page 19 for instructions
to
set the control for the 24
hour time of day display mode.
28