Cocoon POWERTALK 101 - Manual (Page 39)

PowerTALK 101
38
Tests
Tests using standard networking protocols:
•
The standard PING program supplied with Windows 95/98/NT can be used to determine
network operation, confirming PING time to the specified PowerTALK unit.
Tests available using PT.EXE
•
Networking loopback echo test. A special packet is sent to PowerTALK 101, and a special
packet containing address information is returned.
Tests available using PowerTALK 98 under Windows 95 or NT
•
Networking loopback echo test. A special packet is sent to PowerTALK 101, and a special
packet is returned. The total loop time is measured. This packet returns address information
to PowerTALK 98.
•
Loopback echo test. A loopback connector must be installed on the PowerTALK 101 serial
port. The total loop time for a single character transmitted through the loopback connector is
measured.