Cocoon POWERTALK 101 - Manual (Page 38)

PowerTALK 101
37
Commissioning aids
LED indications
Normal LED indications on face plate:
Refer to the LED description on page 13.
All LEDs are scanned through all possible states in sequence red/green, top to bottom,
immediately prior to start of operation.
•
ON/FAIL
Green The communications processor card has initialised and is working properly
Red
An operational error has occurred.
This
Red is not automatically recovered. The machine must be reset.
•
Serial 1 Tx/Rx
Green Transmits serial data
Red
Receives serial data
•
Serial 2 Tx/Rx
Green Transmits serial data
Red
Receives serial data
•
Ethernet Tx/Rx
Green Transmits packet
Red
Receives packet destined for local IP address
Indications on inside of box, only visible when cover is removed:
•
Power
Red Communications processor board powered up, +5VDC.
•
Ethernet
Green Indicates a physical link has been established
Flashing Red Indicates network traffic
Red Ethernet ready / power