Kenmore 417.8413 - Manual (Page 9)

Operating Instructions
Cycle Settings
Appropriate drying Temperature and Dryness Level will au­
tomatically be displayed for each cycle. The settings can be
changed before the cycle is started.
To adjust cycle settings, press any of the settings buttons to
navigate to the cycle settings screen. Scroll through the tem­
perature, dry level, or drying time selections by pressing the up
or down arrows corresponding to each setting.
To protect your fabrics, not all settings are available with every
cycle. Only the settings available for a particular cycle will be
displayed. After you have made the desired adjustments, press
the Back button to return to the home screen or ► START to
begin the cycle.
E note
To change the settings after the cycle starts, press N! PAUSE
and then press the Cycle Settings button. Adjust the settings
and press START to resume the cycle.
DRYING TEMPERATURE
Extra High
Recommended for towels and heavy duty loads.
High
Recommended for durable fabrics.
Medium High
Recommended for most cotton fabrics.
Medium
Recommended for wrinkle free, easy care, lightweight
fabrics and bulky loads.
Medium Low
Recommended for knits.
Low
Recommended for delicate fabrics.
Air Only
This setting (no heat) can only be used with a Timed Dry
cycle to dry items containing feathers, down, foam rub­
ber, plastics or rubber-like materials; to refresh clothing,
stuffed animal, pillows or blankets; and to dust draperies.
DRY LEVEL (Auto Dry)
Select the Normal dry level for most Auto Dry cycles.
Occasionally a load may seem too damp or over-dried
at the end of the cycle. To increase drying time for similar
loads in the future, select a higher setting. For loads requir­
ing less drying time, select a lower setting.
Select Damp Dry for items you wish to partially dry before
hanging or ironing.
DRYING TIME (Timed Dry)
Press the time button to select from 10 to 90 minutes of
drying time in 10-minute increments. This setting is only
available with the Timed Dry cycle.