Kenmore 417.8413 - Manual (Page 13)

Operating Instructions
Other Features
Drying Rack
Use the drying rack to dry items which should not be
tumble dried. Fold down the metal support on the back
of the rack and slowly extend the rack until the lock tabs
click into place. Insert the rack into the dryer drum, resting
the back support on the moisture sensor bars and the front
legs on each side of the lint filter slot.
Place items to be dried on top of the rack, leaving space
between items and not allowing them to hang over the
sides or through the holes. The weight should not exceed
10 lbs (4.5 kg). Select Timed Dry with Air Fluff option for
items containing plastic, foam rubber, rubber-like materi­
als, feathers or down.
When items are dry, remove the rack, push the two center
tabs to collapse the rack and fold up the back support.
Store the drying rack in a convenient location.
Reversible Door
Your dryer is equipped with a reversible door. The door
can be hinged on the right or left side.
E]
NOTE
For step-by-step instructions on DOOR REVERSAL, refer
to the Installation Instructions supplied with this dryer.
Check Exhaust
The Check Exhaust feature may alert you to performance
characteristics that are indicative of poor airflow through
your venting system. If such a situation occurs, a “Check
Exhaust” warning will be displayed during the remain­
der of the cycle. You should immediately unplug your
dryer and inspect your venting system. Make any repairs
or perform any cleaning procedures necessary. Also call
1-800-4-MY-HOME® for information regarding duct clean­
ing services offered through Sears.
IMPORTANT
The Check Exhaust feature is not intended to replace
the requirements for scheduled vent inspection and >
routine maintenance as described in this Use and Care
Guide and also in the Installation Instructions. It is the
owner’s responsibility to continue to maintain a free-
flowing vent system.
If Check Exhaust alerts are repeatedly overlooked, de­
creased drying performance will be noticed and some cycles
may not perform complete duration.
Maintaining a clean exhaust system improves operating
efficiency and helps minimize service calls, saving you time
and money.
13