Handi-mate jr, To jnsert handi-mate jr, To remove handi-mate jr – Kenmore 116.35923 User Manual
Page 7: Operating instructions, Telescopic wand placement, Cord release, Warning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HANDI-MATE JR.®
For operation of
Handi-MaiBJrXÿ
Handi-Mate Jr.®
see separate
Owner’s Manual.
Handi-Mate JrM
Storage
TO JNSERT HANDI-MATE JR«
Place Handi-Mate Jr® into the storage
compartment.
Rotate the Handi-Mate Jr* back until it
snaps into place.
TO REMOVE HANDI-MATE JR.®
Rotate Handi-Mate Jr.® out of the storage
compartment.
OPERATING INSTRUCTIONS
TELESCOPIC WAND
PLACEMENT
Place the telescopic wand in the wand
holder. Place the crevice tool in the top of
the telescopic wand.
■ Crevice
Tool
■ Telescopic j
Wand
!
i
tiri.
Wand
Holder
CORD RELEASE
I.Turn the quick
release upper
cord hook to
either side and
down to release
the power cord.
.aiüuiüim
▲ WARNING
To reduce the risk of electric shock,
this vacuum cleaner has a polar
ized plug (one blade is wider than
the other).
The plug will fit in a polarized outlet
only one way. If the plug does not
fit fully in the outlet, reverse the
plug. If it still does not fit, contact a
qualified technician to install the
proper outlet. Do not change the
lug in any way.
Locking
Notch
Power
Cord -
2. Detach the
power cord plug
from the power cord
and pull the cord off
the quick release
upper cord hook.
Be sure the power
cord is still locked
into the locking notch of the upper cord
hook.
3. Plug the polarized power cord into a 120
Volt outlet located near the floor.
4. To store cord, turn upper cord hook to
the up position, then wrap cord.
A
WARNING
Personal injury and Product Damage
Hazard
» DO NOT place hands or feet under
the vacuum cleaner at any time.
» DO NOT use outlets above coun
ters. Damage from cord to items in
surrounding area could occur.