Kenmore 116.35923 - Manual (Page 17)

DUST BAG REPLACEMENT
A WARNING
Always unplug power cord from elec­
trical outlet before performing mainte­
nance to the vacuum cleaner.
TO REMOVE DUST BAG
Pull on the dust bag cover latch located
on the side of the bag cover.
Grasp the dust bag collar and pull gently,
carefully removing the dust bag.
Throw away the
used dust bag.
Do not reuse
dust bag.
Bag
Collar
Dust
Bag
Check the
bag collar
and the
motor safety
filter for dirt
or clogs.
A
CAUTION
NEVER REUSE A DUST BAG. Very
fine materials, such as carpet fresh­
ener, face powder, fine dust, plaster,
soot, etc. can clog the bag and cause
it to burst before it is full. Change bag
more often when vacuuming these
materials.
TO REPLACE DUST BAG
Dust
Bag
— Safßty
Seal Tab
Unfold the
new dust bag.
Fold the safety
seal tab on the
new dust bag
away from the
opening that
fits on the bag
holder.
Note: See PARTS AND FEATURES for
Bag number.
Insert the dust bag
onto the bag collar
completely by holding
the bag coliar.
Place the dust bag collar Into position.
Tuck the bag
behind each of
the four bag
retention corners
shown here. Be
sure the bottom
and sides of the
dust bag are
compietely within
bag cavity prior to
closing the bag
cover.
Bag
Retention
Corner
Close the bag
cover.
You will hear a dis­
tinct snap when
cover is securely
closed.
Check to see that the dust bag is fuHy
placed in the bag chamber.
17