Kenmore 116.35923 - Manual (Page 12)

Extend the wand to its full length. Turn the
locking ring to the LOCK position. Attach
the wand onto the open end of the hose.
Suction
Control Slide
Wand
\ Locking Ring
Upper
Wand
Align the tabs on the wand with the “J”
slots in the hose. Push the wand into the
hose and twist to the right to lock.
To achieve maximum reach with the
attachments, add the crevice tool to the
end of the wand by inserting and twisting
slightly.
The combination brush can be attached
directly to the wand.
Brush
Combination
Brush
Brush
Holder
Use the brush holder without the brush for
greater suction on furniture cushions or
stairs. Use brush holder with brush for
cleaning loose surfaces such as drapes,
-Hose
Attach floor brush directly to
extension wand.
Telescopic
Wand
Extension
Wand
Floor
Brush
Use the floor brush for cleaning of floors
or stairs.
TO OPERATE SUCTION
CONTROL SLIDE
Telescopic Wand
When using attachments for cleaning
draperies, small rugs with iow pile and
other delicate items, twist the suction con­
trol slide to the open position.This slide is
located on the telescopic wand, close to
the hose.
Suction
Control
This wiil reduce
suction for ease of
cleaning.
Note: Return suction control siide to the
closed position for normal cleaning.
▲ CAUTION
When using attachments, be careful
not to overextend the stretch hose
when reaching.Trying to reach beyond
the hose stretch capability could cause
the vacuum cleaner to tip over.
12