Kenmore 116.38412 - Manual (Page 20)

LIGHT BULB CHANGING
WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result In
electrical shock or personal Injury
from cleaner suddenly starting.
Disconnect the power cord from the elec­
trical outlet.
Press the handle release pedal to let the
upper portion of the cleaner lay back
against the floor
Remove
the base
civ
outlined in
the BELT
CHANG­
ING AND
BRUSH
CLEANING
section.
CAUTION
Do not use a bulb rated over 15W.
During extended use, heat from
the bulb could overheat surround­
ing plastic parts.
Grasp the
bulb socket
assembly
and while
gently rock­
ing it from
Side to side,
pull it up out
of the noz­
zle housing.
Bulb Socket Ass&mbfy^
To R b I bssb
Remove the light
bulb by pushing
the bulb in while
turning counter­
clockwise to
release from the
slot.Then pull the
light buib straight
out.
To replace the light
bulb carefully insert
and turn clockwise
to securely fit into
slot
NOTE: See PARTS
AND FEATURES
for bulb #.
A
CAUTION
Do not plug in or turn on until the
vacuum Is completely reassem­
bled.
Replace the base plate as outlined in the
BELT CHANGING AND BRUSH
CLEANING section.
20