Bag changing, To remove bag, Warning – Kenmore 116.38412 User Manual

Page 13: Do not, Caution, To replace bag, Bag changing to remove bag

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

BAG CHANGING

TO REMOVE BAG:

WARNING

Always unpiug powar cord from
electrical outlet before performing
any service on vacuum.

Press the
release button
located on the

top of the bag
cover.

HsisssB
Button

Bag

Caver

Pull the bag
cover forward.
Remove and
lay aside.

Grasp the dust
bag collar and
pull gently, care

fully removing the

dust bag.

Throw

away the
used dust
bag.

Do not

reuse.

CAUTION

NEVER REUSE A DUST BAG. Very

fine materials, such as carpet
freshener, face powder, fine dust,

piaster, soot, etc. can clog the bag
and cause It to burst before It Is

full. Change bag more often when
vacuuming these materials.

Dirt Tube/
Bag Holder

Bacf

Cavity

Motar
Safety
Filter

Check the dust

tube and the

motor safety

filter.

If either is
blocked, check

the TROUBLE
SHOOTING
chart.

TO REPLACE BAG:

Dust Bao

Safety
Seal Tab

Fold the safety
seal tab on the
new dust bag

away from the
opening that
fits on the dust
tube,

NOTE:

See PARTS AND FEATURES for

Bag #.

Unfold the new dust bag.

Insert the dust bag

onto the dust tube
completely by
holding the bag
collar. Snap the
dust bag collar
into position.

Be sure bottom of dust bag Is completely

within bag cavity prior to replacing the

bag cover.

Position

the bag
cover so

its posi

tioning tab
fits into
the body

positioning

tab slot.

Caver

Body

-------------

Positioning

Slot

».

Bag Cover

Positioning Tab

■................ ...........................................

Bag~j

Cover \

Close the bag
cover.

You wiii hear a
distinct snap
when cover Is
securely closed.