Draw in your pipes and fittings, Plan your installation, Suggested slab foundation installation – Kenmore INTELLISOFT 625.38376 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Plan Your Installation
Suggested Slab Foundation Installation
outside
- hard
p-trap inside home, if possible.
Otherwise, run to a dry well.
FIG. 4
DRAW IN YOUR PIPES
AND FITTINGS
Draw the plans for your “IN" and “OUT”
piping here. Include all pipe, fittings and
accessories you will use.
Make a list of all materials you will need
and buy them before you begin to install
the water softener.
120V-60Hz
Electrical
Outlet
Left
Valve Outlet Side
Your House Main Water Pipe
Valve Inlet
Right
* In what direction does the water flow?
Be sure to plan “IN" and “OUT” piping so water
flow is to the softener valve inlet. Plan a
crossover If flow Is from left to right.
CROSS-OVER
Main Water Pipe
FIG. 5
Questions? Call The Kenmore Water Line 1-800-426-9345