Kenmore ELECTRIC RANGE 790.4660 - Manual (Page 22)

The is used to automatically convert a standard baking recipe for convection baking. When set properly, this
feature is designed to display the actual converted (reduced) temperature in the display.
Convection Convert may ONLY be used with a Bake, Timed Bake, Delayed Start or Delayed Timed Bake setting. When
used with a Timed Bake, a Delayed Timed Bake setting, the Convection Convert feature will display a “CF” for check food
when the bake time is 75% complete (see Figure 4). At this time the oven control sound 3 beeps at regular intervals until
baking has finished. When the bake time has completely finished the control will display “End” and will sound 3 beeps
Setting Oven Controls (cont’d)
Setting Convection Convert Feature
every 30 seconds until the is pressed (see figure 5).
INSTRUCTIONS
Using Convection Convert (Bake) feature to
automatically adjust oven temperature (example: below
when setting oven for 350°F (°C))
1. Arrange interior oven racks and place food in oven.
2. Press
PRESS
- - will appear in the display (Figure 1).
3. Press (^3^ (^5^ C^' will flash and "350°" will appear CDCD®
in the display (Figure 2). If a Timed Bake or a Delayed Timed Bake
is desired, enter times now.
4. Press "CONV", "BAKE" and the oven temperature
adjustment will appear in the display (for this example 325°F). A
beep will sound once the adjusted oven temperature is reached. The
display will show "325°", "CONV", "BAKE" and the fan icon (Figure
3).
Note: The oven icon will show a rotating fan within the square. This
rotating fan icon indicates when the Convection Fan is operating (See
rotating fan in figure 3).
Press to cancel Convection feature at any time.
Note: The minimum amount of cook time using the Convection Convert
feature with a Timed Bake or a Delay Timed Bake is 20 minutes.
/CON^
C onvert
DISPLAY
ion _________ ‘
lOU ---------------
BAX£
Figi
jre 1
I-30
350'
Figi
jre 2
ilii
;. CONV
3è5
Figi
jre 3
CONV
ilii
Figi
jre 4
3.'30
E n d
Figure 5
22